210-Aluminum Spray Plastic Bone Sawing Machine
Hante
Availability: | |
---|---|
Quantity: | |
Operation notes |
1、installation of saw belt, pay attention to the direction of the saw blade, in the right side of the cutting surface saw teeth downward. |
2、Scraper blade to press the saw blade but not contact saw teeth, otherwise it will increase the noise, reduce the life of saw blade. |
3、When the bone sawing machine is not in use, loosen the handle with tension on the top of the machine for 2 turns, and tighten the handle when the machine is turned on next time, so that the service life of the saw blade can be prolonged. |
4、When the sawing machine opens the door, the safety switch stops the machine, but the saw belt will continue to rotate under inertia. Do not touch the saw belt at this time. |
5、Do not cut the meat directly by hand without any protection. Especially when sawing small meat products, the operation should be concentrated and careful. |
Saw blade replacement procedure |
1.When reinstalling the saw belt, loosen the tensioning device (counterclockwise from the upper direction of the machine) and install the new saw belt. At this time, pay attention to the direction of the saw belt, otherwise the saw belt will loose and fall off. |
2.Ensure that the tape is properly installed between the scraper, top pulley, bottom pulley, and center plate, and can pass through the guide groove in the center. |
Characteristic:
Suitable for cutting all kinds of animal bones, frozen meat, etc.
1. Stainless steel body, safe and hygienic.
2. The safety lever switch is installed. When the machine cover is opened, the machine stops working.
3. Good waterproof performance, easy to clean.
4. Low noise, high horsepower and low material loss.
Factory Tour:
Shaoxing Shangyu Hante Machinery Equipment Co. , Ltd. is specialized in producing bimetal band saw blades, carbide band saw blades, food saws, woodworking alloy band saw blades and Selling high-speed circular saw machines, sawing machines, circular saw blades, and food processing machinery.
Our advantage:
1. Factory with 25 years of experience in the production of bimetallic band saw blades
2. Products have been exported to more than 60 countries and regions
3. All products have been strictly tested and quality assurance is provided
4. Provide after-sales service support
5. Main products: bimetal band saw blades, carbide band saw blades, high-speed circular saw machines, sawing machines,Food processing machinery.